background image

Specifications, Part Numbers, and Accessories

MSW 4V SDI rs • Specifications, Part Numbers, Accessories

 

MSW 4V SDI rs • Specifications, Part Numbers, Accessories

A-4

A-5

Contact closure ..............................  (1) 3.5 mm captive screw connector, 5 pole
Contact closure pin configurations 

1 = input 1, 2 = input 2, 3 = input 3,  
4 = input 4, 5 = GND

Program control .............................  Extron’s Universal Switcher Program for 

Windows

®

 

Extron’s Simple Instruction Set (SIS

)

General

External power supply  ................  100 VAC to 240 VAC, 50/60 Hz, external, 

autoswitchable; to 12 VDC, regulated

Power input requirements

MSW 4V rs, MSW 4SV rs .  12 VDC, 0.2 A
MSW 4V SDI rs ..................  12 VDC, 0.4 A

Temperature/humidity ................  Storage: -40 to +158 °F (-40 to +70 °C) / 

10% to 90%, noncondensing 
Operating: +32 to +122 °F (0 to +50 °C) / 
10% to 90%, noncondensing

Rack mount ....................................  Yes, with optional 1U rack shelf  

#60-190-01 or 60-190-20; also under-
furniture mountable with optional 
brackets #70-212-01

Enclosure type  ..............................  Metal
Enclosure dimensions  ..................  1.7" H x 4.3" W x 3.0" D  

(1U high, quarter rack wide) 
4.3 cm H x 10.9 cm W x 6.5 cm D 
(Depth excludes connectors.)

Product weight ..............................  0.6 lbs (0.3 kg)
Shipping weight  ...........................  3 lbs (2 kg)
Vibration  ........................................  ISTA 1A in carton  

(International Safe Transit Association)

Listings............................................  UL, CUL
Compliances ...................................  CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ...............................................  30,000 hours
Warranty  ........................................  3 years parts and labor

N

 

All nominal levels are at ±10%.

N

 

Specifications are subject to change without notice.

Parts

Included parts

These items are included in each order of an MSW 4V SDI rs 

mini switcher:

Included parts 

Part number

MSW 4V SDI rs 

    60-481-11

12 VDC, 1A external power supply (Int’l) 

    70-055-01

IEC power cord
(2) Female 3.5 mm, 5-pole captive screw connectors 

 

    10-319-10

(1) Female 3.5 mm, 2-pole captive screw connectors (orange) 

 

    10-319-15

Tweeker (small screwdriver)
(4) Rubber feet (not attached)
MSW 4V SDI rs User’s Manual

Optional accessories

These items are optional accessories that can be used with the 

MSW 4V SDI rs mini switcher:

Accessories 

Part number

CCR 204 Contact Closure Remote 

    60-794-02

IR 102 Remote Control Kit 

    70-224-01

RSF 123 1U 3.5" Versatools Rack Shelf Kit 

    60-190-20

RSB 123 1U 3.5" Versatools Basic Rack Shelf       60-604-20
RSB 126 1U 6" Basic Rack Shelf 

    60-604-10

RSU 126 1U 6" Universal Rack Shelf Kit 

    60-190-10

RSU 129 1U 9.5" Universal Rack Shelf Kit  

    60-190-01

RSB 129 1U 9.5" Deep Basic Rack Shelf 

    60-604-01

MBU 123 Under-Desk Mount Kit 

    70-212-01

Содержание MSW 4V SDI rs





















Отзывы: