Extron electronics MPX Plus 866 A, Руководство пользователя

Страница: 96 / 222

SIS
™
Programming and Control, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • SIS Programming and Control
4-12
PRELIMINAR
Y
N
X@
= Output number 01 – 06 for audio
X#
= Input number 01 – 14
X%
= Mute 0 = off (unmuted)
1 = on (muted)
X&
= Audio gain 0 – 24 (1 dB/step)
X*
= Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X(
= Audio attenuation 1 – 18 (1 dB/step
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Audio input gain and attenuation
N • The set gain (G) and attenuation (g) commands are case sensitive. The increment, decrement, and read level commands
are not case sensitive.
•
Individual controls, offering finer trim adjustments (in 0.1 dB increments) for the right and left channels and group
master offsets are present in the DSP and available through software control (see “DSP Configurator Program”, in
chapter 5, “Switcher Software“). The results of these controls are not shown in the responses below.
Set input audio gain to
+ dB value
X#
*
X&
G In
X#
•Aud
X*]
Example: 1*2G
In01•Aud+02
]
Set input 1 audio gain to
+2 dB.
Set input audio attenuation
to - dB value
X#
*
X(
g In
X#
•Aud
X*]
Increment level
X#
+G In
X#
•Aud
X*]
Increase audio level by 1 dB.
Example: 6+G
In06•Aud+03
]
Increment audio input 6
level from +2 dB to +3 dB.
Decrement level
X#
-G In
X#
•Aud
X*]
Decrease audio level by 1 dB.
Example: 7-G
In07•-09
]
Decrement audio input 7
level from -08 dB to -9 dB.
Read input audio level
X#
G
X*]
Audio mute
Audio mute
X@
*1Z Amt
X@
*1
]
Mute audio output
X@
(audio off).
Audio unmute
X@
*0Z Amt
X@
*0
]
Unmute audio output
X@
(audio on).
Read audio mute
X@
Z
X%]
1 = mute on, 0 = mute off.
Global audio mute 1*Z
Amt1
]
Mute all audio outputs.
Global audio ummute 0*Z
Amt0
]
Unmute all audio outputs.
Command/response table for basic SIS commands (continued) •
Individual controls, offering finer trim adjustments (in 0.1 dB increments) for the right
and left channels and group master offsets are present in the DSP and available through
software control (see “DSP Configurator Program”, in chapter 5, “Switcher Software“).
The results of these controls are not shown in the responses below.