MKP 3000 Remote Control Panel • Local Operation
Local Operation, cont’d
MKP 3000 Remote Control Panel
4
Chapter Four
SIS
™
Operation
RS-232 Links
Ethernet Link
Host-to-MKP Instructions
MKP-Initiated (Unsolicited) Messages
MKP Error Responses
Using the Command/Response Table
3-18
Power
R
R
Pre
ss
a
nd
hold
the
Re
s
et
bu
tton while yo
u
a
pply power to the MKP.
The LED fl
as
he
s
on
a
nd off.
Rele
as
e the Re
s
et
bu
tton.
Figure 3-9 — Performing a hard reset
MKP 10 MAAP Operation
When the connected switcher has a large matrix size (up to 128
inputs by 128 outputs), selecting an input or output number by
rotating the Select knob can be inconvenient. The optional
MKP 10 MAAP keypad (figure 3-10) allows rapid input/output
selection.
BACK
CANCEL
1 2 3
4 5 6
7 8 9
0
MKP 10
2
4
1
3
BACK
CANCEL
Figure 3-10 — Optional MKP 10 MAAP keypad
1
Power LED —
When lit, this LED indicates that power is
applied to the MKP 10 MAAP.
2
Cancel key —
Press and release the Cancel key to reset the
selected input or output value shown in the MKP 3000’s LCD
display to 000 before using the numeric keys (
3
) to enter a
specific value.
3
Numeric keys —
Press and release the numeric keys (0 through
9) to enter a specific value as the selected input or output shown
in the MKP 3000’s LCD display.
4
Back key —
Press and release the Back key to backspace (erase)
the least-significant (rightmost) digit shown in the LCD display.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203