manualshive.com logo in svg

Extron electronics IP Link IPL EXP 200, Руководство пользователя, Страница: 41 / 52

Поделиться
Скачать
Extron electronics IP Link IPL EXP 200 Скачать руководство пользователя страница 41

IPL EXP I/O Series • Software-based Configuration and Control

33

Downloading the Software and Getting Started

GC software updates and a large variety of device drivers can be downloaded from the 

Download

 page on the Extron website (

www.extron.com/download/index.aspx

). 

When you locate the desired software or driver package, follow the on-screen directions to 
download and install it.

NOTE:

 

New RS-232 and Ethernet drivers are required

. Use serial and Ethernet 

drivers developed specifically for the IP Link Pro platform. With the exception of IR 
device drivers, drivers used for the previous generation IP Link (non-Pro) control 
processors are not compatible.

Locating Software, Firmware, and Driver Files on the Extron Website

There are three main ways to find software, firmware, and device drivers within 

www.extron.com

:

• 

Via links from the web page for the specific product

• 

Via the 

Download Center

 page (Click on the 

Download

 tab at the top of any page 

within the Extron website.)

• 

Via links from search results

NOTE:

  For some software you have the option to click the 

Download

 button to begin 

downloading the software file. For other software there is a link for contacting an 
Extron support representative who can provide you access to the latest version.
To obtain Extron control product software, you must have an Extron Insider account 
and contact an Extron support representative. Extron provides training to our 
customers on how to use the software. For Global Configurator Professional, you 
must first attend Extron training, pass a proficiency test, and achieve Extron Control 
Professional Certification before being able to access all the features of that program.

Via links from the web page for the specific product

1. 

Navigate to the web page for the specific product model by performing one of the 
following:

• 

Enter the model name into the search field in the upper right of any Extron web 
page and click the 

magnifying glass

 icon.  

Or...

 

• 

Select the model name from the 

Product Shortcuts

 drop-down list in the 

upper left of the Extron home page or 

Products

 page.

2. 

Click the 

Downloads

 tab in the middle of the product page. A list of available software, 

firmware, and documents for that model appears on screen.

3. 

Click on the name of the desired software or firmware to start downloading the file, or 
click on the link for device drivers to navigate to a page from which you can select either 
a driver package or specific drivers for individual devices.

Via the Download Center page

1. 

Click on the 

Download

 tab at the top of any page within the Extron website to access 

the 

Download

 page.

2. 

Click on the link for the desired software product category (such as Global Configurator 
Professional, firmware, or control system device drivers) in the center of the screen. A 
page opens that allows you to make more specific selections from within that category.

Содержание IP Link IPL EXP 200





















































Отзывы:

Нет отзывов