FPC 6000 • Operation
26
Use the
Mute/Unmute
,
H
on page 24) to change the mute status of an
output that has been selected.
NOTES:
•
When selected, the button lights up.
•
After 30 seconds with no front panel activity, all buttons time out.
•
After 3 minutes with no front panel activity, the panel enters saving mode. The
touchpanel becomes active again when it detects motion in front of the screen. (This
timeout can be changed.)
Signal Selection Buttons
These buttons (
G
) are designed to select the matrix signal type being controlled. The user can
decide to switch all signals (
Video
,
Audio
and
USB
) together, or select single or multiple signal
types for breakaway switching.
NOTE:
FOX3 USB breakaway switching requires a Matrix LinkLicense.
Mute/Unmute Button
When you select an output button, the mute/unmute button (
H
) becomes active. This button
allows you to mute both the video and audio being sent to the selected output.
When you mute the audio and video, the output button shows a diagonal line through the audio
and video icons (compare unmuted output 1 and muted output 2 in figure 26).
Output 2
2
Output 1
1
Figure 26.
Unmuted and Muted Outputs
Select All
To create potential ties from a selected input to all outputs, press
Select
All
(
J
). For the ties to
go into effect, press the
Take
button.
NOTE:
When you select an input and press
Select
All
, the
Mute
button is renamed to
become the
Take
button and the button that was labeled
Take
is renamed to become the
Break
button.
Take
When you link an input and an output, using the
Ties
screen, you create a potential tie. For the
tie to go into effect, press the
Take
button (
I
).
Break
This button is not available on the default screen. It only becomes available when you select an
input and press
Select
All
.
Press
Take
to form ties between the selected input and all outputs. Or press
Break
to break all
previously existing ties to the selected input.
Clear Selection
Ties created on this screen do not go into effect until they are saved by pressing
Take
. To undo
ties before they have been saved, press the
Clear
Selection
button (
K
).
figure 26
Содержание FPC 6000
Страница 6: ......
Страница 8: ...FPC 6000 Contents viii ...
