Extron electronics FPC 5000, Руководство пользователя

Страница: 37 / 60

3-17 FPC 5000 Front Panel Controller • Matrix 12800 Operation
5 . To add the potential tie or set of ties that you have just created to a queue of
tie commands that take affect all at once
, touch the green Queue button.
The FPC displays the equivalent SIS commands in the Pending Tie
commands field.
6 . To add more potential ties to the queue , repeat steps 1 through 3 .
Only one input can be tied to given output. If a queue of tie commands
attempts to assign multiple inputs to an output, the Matrix 12800 makes each
of the ties in turn and the last switch in the queue is the tie that remains at the
end of the sequence.
7 . To switch an immediate tie or to switch all of the ties in the queue, touch the
green
Take button.
Preset screens
After you have created all of the ties that will be needed for a specific task, the
configuration can be saved as either a global or room preset. The Matrix 12800 can
support up to 64 global presets and up to 10 room presets in each of up to 32
rooms.
To create room presets, you must have already created rooms and assigned
outputs to the rooms when you virtualized the system, refer to the
Matrix
12800 Wideband, Sync, or Audio Switchers User’s Manual ,
part #68-556-01.
You cannot create rooms or assign outputs to the room using the FPC 5000.
When you touch the amber Preset button , the FPC displays the Global
Preset screen by default (
7
on figure 3-10).
Working with either global or room presets are similar operations with the
exception of selecting the room presets or global presets button and selecting a
room if required.
Save, recall, or delete a global preset
See
7
on figure 3-10. Save, recall, or delete a global preset as follows:
1a
.
From any screen other than the Room Preset Screen
, touch the blue User >
amber Preset buttons. .
1b . From the Room Preset screen , touch the green Global button.
The FPC displays the Global Preset screen.
2
. Select the desired global preset number by touching the appropriate preset
button.
The Delete , Save , and Recall buttons appear.
If this global preset has not been used before, only the Save button appears.