4.
Routing cables through the transformer cover plate —
Slide and remove the
terminal cover plate. The transformer cover plate is mounted to the speaker with the
transformer side down. See the illustration below.
Black (-)
To Second
Speaker
Red (+)
Red (+)
Black (-)
From Amplifier
(70V/100V)
(Red) To Speaker
(+) Terminal
(Black) To Speaker
(-) Terminal
NC
1 W
2 W
4 W
8 W
16
W
COM
70
V
100
V
CO
M
NC
16
W
8 W
4 W
2 W
1 W
5.
When using flexible conduit —
Insert the conduit into the cover plate opening
using an appropriate conduit adapter, and secure the conduit to the plate. See below.
Transformer Cover Plate
Seismic Cable Pass
Through Loop
Flexible Conduit
Flexible Conduit Adapter
Rear of Speaker
NOTE:
Installation of conduit and conduit adapters should conform to all
applicable building codes and local ordinances.
FF 220T Speakers • Installation
4