
Finishing Steps, All Installation Types
10.
Replace the transformer cover plate and tighten the two cover plate screws that were
loosened in step
3
.
11.
Temporarily test the system and speakers by powering on the amplifier and listening
for the correct response from the speakers, then disconnect power from the amplifier.
12.
For installation in a 2' x 2' ceiling tile, remove a tile and place the speaker on the
existing support rails as shown below.
Extron
FF 220T
Two-way Ceiling
Speakers
Ceiling Tile
Ceiling Tile
Rails
For installations in a 2' x 4' ceiling tile (which was cut in half in step
2
), install the
supplied T-rail crosspiece as shown below.
Existing
Ceiling Tile
Rails
T-rail
Crosspiece
(supplied)
Ceiling Tile
Extron
FF 220T
Two-way Ceiling
Speakers
FF 220T Speakers • Installation
8