$80$6)0ROAND$80($-)3ERIESs/PERATION
30
2.
To enter I/O group mode, press and
hold
the Input 1 and Output 1 buttons until all
buttons that are not grouped light green (approximately 2 seconds).
1
2
3
4
5
6
7
8
OUTPUTS
1
2
3
4
5
6
7
8
INPUTS
OUTPUTS
INPUTS
1
2
3
4
5
6
7
8
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
Press and
hold
the Input 1 and
Output 1 buttons.
1
2
3
4
5
6
7
8
Figure 38.
Select
I/O Group
Mode
3.
0RESSANDRELEASETHE%NTERBUTTONTOSELECTGROUP
C O N T R O L
PRESET
ESC
VIEW
1
3
2
4
Press and release the Enter button to select group 1.
The button lights to indicate the selection.
Group #:
ENTER
Figure 39.
Select I/O Group 1
4.
Press and release the desired input and output buttons.
Press and release the Input 1 through Input 4 buttons.
The selected buttons light.
Press and release the Output 1 through Output 4 buttons.
The selected buttons light.
5
6
7
8
OUTPUTS
5
6
7
8
INPUTS
1
2
3
4
1
2
3
4
Figure 40.
Assign Inputs and Outputs to Group 1
NOTES:
s
I/O groups are protected when front panel lock mode 2 is selected.
9OUCANVIEWTHEGROUPSINLOCKMODEBUTYOUCANNOTCHANGETHEM
from the front panel (see “
Locking and Unlocking the Front Panel
(Executive Modes)
” on page 37).
s
If front panel lock mode 2 is selected and you try to perform this step,
THEBUTTONPRESSESAREIGNOREDANDTHE%NTER6IDEOAND!UDIOBUTTONS
flash.
