Extron electronics Dual Link DVI Transmitter and Receiver DVI DL 201 Rx Скачать руководство пользователя страница 31

Extron

®

 Warranty

Extron

 

Electronics warrants this product against defects in materials and workmanship for a period of 

three years from the date of purchase; touchscreen display and overlay components are covered for 1 
year. In the event of malfunction during the warranty period attributable directly to faulty workmanship 
and/or materials, Extron Electronics will, at its option, repair or replace said products or components, to 
whatever extent it shall deem necessary to restore said product to proper operating condition, provided 
that it is returned within the warranty period, with proof of purchase and description of malfunction to:

USA, Canada, South America, 
and Central America

Extron

 

Electronics 

1001 East Ball Road 
Anaheim, CA 92805 
U.S.A.

 
Japan

Extron Electronics, Japan 
Kyodo Building, 16 Ichibancho 
Chiyoda-ku, Tokyo 102-0082 
Japan

Europe, Africa, and the Middle East:

 

Extron Europe 
Hanzeboulevard 10 
3825 PH Amersfoort 
The Netherlands

China

Extron China 
686 Ronghua Road 
Songjiang District 
Shanghai 201611 
China

Asia

Extron Asia 
135 Joo Seng Road, #04-01 
PM Industrial Bldg. 
Singapore 368363 
Singapore

Middle East

Extron Middle East 
Dubai Airport Free Zone 
F12, PO Box 293666 
United Arab Emirates, Dubai

This Limited Warranty does not apply if the fault has been caused by misuse, improper handling care, 
electrical or mechanical abuse, abnormal operating conditions, or modifications made to the product that 
were not authorized by Extron.

NOTE:

  If a product is defective, please call Extron and ask for an Application Engineer to receive an RA 

(Return Authorization) number. This will begin the repair process. 
 

USA

:  (714) 491-1500   

 

Europe

: +31.33.453.4040 

 

Asia

: +65.6383.4400  

 

Japan

:  

+81.3.3511.7655 

Units must be returned insured, with shipping charges prepaid. If not insured, you assume the risk of 
loss or damage during shipment. Returned units must include the serial number and a description of the 
problem, as well as the name of the person to contact in case there are any questions. 

E

xtron

 

Electronics makes no further warranties either expressed or implied with respect to the product 

and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron 
Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this 
product even if Extron Electronics has been advised of such damage.

Please note that laws vary from state to state and country to country, and that some provisions of this 
warranty may not apply to you.

Содержание Dual Link DVI Transmitter and Receiver DVI DL 201 Rx

































Отзывы: