Extron electronics DMP 64 Скачать руководство пользователя страница 118

Страница: 118 / 152

To push all of the DSP Configurator gain and processor block adjustments
(configuration), and all presets to the DMP 64, proceed to step

To tailor the push (push only the configuration, only the presets, or the configuration
and selected presets), click the

Advanced

button and proceed to step

Select the

Custom

radio button.

Select the desired checkbox(es);

Push Configuration

and/or

Push Presets

. If

Push Configuration

is the only box checked, click

and proceed to step

NOTE:

Push Configuration

includes all mix-point, gain and processor block

settings. It does not include partial presets.

Push Presets

was clicked in step

, click

All

to select all presets or

Selected

choose specific presets.

•

Selected

was clicked, click

and proceed to step

•

All

was clicked (equivalent to a standard push), click

and proceed to

step

Selected

was clicked in step

, the Synchronize with Device dialog box (

)

reappears. Click

. The presets dialog box appears.

Select the desired partial presets to push by clicking the appropriate checkbox(es).

Click

. — Proceed to step

10.

Click

. The DSP Configurator program is connected live to the device and the

processors, and presets are pushed or pulled as selected, completing the selection of

Live

mode.

10.

If changes were made to the DSP parameters (including mix-point, gain and/or
processor blocks) since the last file save, the DSP Configurator prompts to save the
file. Click

Yes

, as desired,

If a password was required and not entered or if an incorrect password was entered,
the program prompts for the password.

The configuration and/or presets will be uploaded to the DMP 64.

DMP 64 • Software Control

112

Содержание DMP 64

























































































































































Результаты поиска

Содержание DMP 64

Отзывы:

Похожие инструкции для DMP 64

Бренды по названию

Популярные бренды

Extron electronics DMP 64, Руководство пользователя

Результаты поиска

Содержание DMP 64

Отзывы:

Похожие инструкции для DMP 64

Бренды по названию

Популярные бренды