manualshive.com logo in svg

Extron electronics DMP 64 Plus, Руководство пользователя

Поделиться
Скачать
Extron electronics DMP 64 Plus Скачать руководство пользователя страница 28

DMP 64 Plus • Dante Controller

21

Dante Controller

This section describes the network installation, configuration, and control using Dante 
Controller for Windows and covers the following topics:

• 

Overview

• 

Downloading and Installing Dante Controller

• 

Configuring the DMP 64 Plus in Dante Controller

• 

Physical Dante Network Setup

• 

Dante Controller Operation

• 

Dante Troubleshooting

Overview

DMP 64 Plus AT devices (DMP 64 Plus C AT and C V AT) use Dante technology by 
Audinate

®

 to provide high performance digital audio networking over standard TCP/IP 

networks. The Dante Controller software application is used to route audio on the network. 
Dante allows audio channels to be transported across a switched Ethernet data network 
while meeting the quality requirements of professional audio.
Up to 16 channels can be transmitted from the DMP 64 Plus AT to the Dante network and 
up to 32 channels can be received by the DMP 64 Plus AT from the Dante network.
Audio signals are converted by DMP 64 Plus AT devices, processed and routed to the 
AT bus, and transmitted onto the Dante network. Audinate recommends the Dante audio 
network be kept separate from other networks. However, the audio network can be shared 
with control traffic or unrelated data traffic. Audio channels can be unicast or multicast to 
make the best use of available bandwidth.

Downloading and Installing Dante Controller

Dante Controller from Audinate is required to route transmitters and receivers and can be 
used to configure Dante settings and monitor performance. Install Dante Controller on a PC 
running Microsoft

®

 Windows

®

 7 or newer. For full details about computer requirements and 

to download the software, see the Dante Controller product page at 

www.extron.com

.

To download Dante Controller:

1. 

On the Extron web page, hover over the 

Download

 tab at the top of the page.

2. 

From the 

Featured Software

 list, select 

Dante Controller

.

3. 

From the 

D

ante Controller

 page, click 

Download

.

4. 

On the 

Download Center

 page, fill-in the required fields.

5. 

Click the 

Download dantecontroller.exe

 button.

6. 

If you choose to run the file, follow all prompts. If you saved the file, click the saved file 
to begin installation when ready.

The installed Dante Controller program files are saved in: 

C:\Program Files (x86)\Audinate\Dante Controller\DanteController.exe.

Содержание DMP 64 Plus




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды