Revision Date:
10/16/2020
Page 20 of 28
DMP Plus Series C V / C V AT – Patton POTS
3.6
System Overview
The
Home
tab is used to view a summary of Line configuration and call status.
In the example below, Line 1 has a configuration but shows as not registered.
The Patton POTS
interface will not show as registered
.
Appearance-specific (caller-specific) details for active calls can be accessed by clicking on the
corresponding Line entry.
VoIP Dialer in DSP Configurator Software will not work since the line does not register to a call
server.
3.7
Troubleshooting
In the event of a problem, review the following:
•
Verify the correct port is used on the DMP Plus
o
LAN 2 is used in the example above
Figure 7 DMP 64 PLUS C V AT - Rear
•
Verify the IP addresses have been configured properly
o
DMP Plus LAN2:
192.168.1.254
o
Patton POTS Interface:
192.168.1.253
