Extron electronics Digital Video Transmitter and Receiver HDMI 201 Tx/Rx, Руководство пользователя, Страница: 6 / 23

DVI 201 and HDMI 201 Tx/Rx • Introduction
Introduction, cont’d
1-4
DVI 201 and HDMI 201 Tx/Rx
Features
Transmits single link DVI-D or HDMI signals over two
CAT 5/5e/6/7 cables — Standard twisted pair cables
provide an economical, easily installed cable solution.
Long distance transmission —
CAT 5/5e/6 UTP cable — Accommodates 720p and 1080i
HDTV or XGA video over 200' (60 m), and 1080p HDTV
or UXGA (1600 x 1200) over 100' (30 m).
CAT 7 UTP cable — Accommodates 720p and 1080i HDTV or
XGA video over 200' (60 m), and 1080p HDTV or UXGA
(1600 x 1200) over 125' (38 m).
Local monitor output (DVI 201 Tx/Rx only) — The DVI 201 Tx
transmitter features a DVI-D output for connection to
local monitor.
Supports DDC and HDCP copy protection transmission
—
The Tx/Rx pairs fully support long distance transmission
of the DDC and HDCP signals.
DDC routing to local or remote display (DVI 201 Tx/Rx only) —
At the DVI 201 Tx, the DDC or HDCP signal is directed to
either the local display or the remote display, depending
on which is more critical in receiving the signal.
Remote powering of transmitter or receiver — Only one power
supply is necessary to power both devices.
RS-232 pass-through — Bidirectional RS-232 control signals can
be transmitted alongside the DVI or HDMI signal, so that
the remote display can be controlled without the need for
additional cabling.
Supports CEC signal transmission
1 " high, quarter rack width, metal enclosures — With low
profi le enclosures, both transmitter models and both
receiver models can be discreetly installed in locations,
such as behind a plasma or LCD fl at-panel display.
External 100 VAC to 240 VAC, 50/60 Hz, international power
supply (part #70-055-01) included
2
Chapter Two
Installation and Operation
Mounting the Tx/Rx
Connections
Operation
Technical Points for Digital Video and Content Protection Encryption
Troubleshooting