Extron electronics CrossPoint 124, Руководство пользователя

Страница: 28 / 68

Operation, cont’d
CrossPoint Plus Matrix Switchers • Operation 3-8
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC
ESC
RGBHV AUDIO
RGBHV
12
8
CONTROL I/O
A
B
ENTER
E
C C
1
3 8 4
5
C
D
B
2
B
LED key: = off, = on, = blinking,
= on for 2 seconds, then off
2
Figure 24 — Example 2: Adding a video tie
E
Press and release the Enter button. The input and output LEDs turn off. The
current configuration is now defined as video input 5 tied to video output 1,
output 3, output 4, and output 8; and audio input 5 tied to audio output 3,
output 4, and output 8.
Example 3: Remove a tie from a set of video and audio ties
See figure 25 and the following steps for an example in which an existing audio tie
is removed from the current configuration.
C
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC
ESC
RGBHV AUDIO
AUDIO
12
8
CONTROL I/O
A
B
5
C
8
C
4 3
2
LED key: = off, = on,
= on for 2 seconds, then off
2
Figure 25 — Example 3: Selecting audio, selecting input 5
A
Press and release the Esc button. The Esc LED turns on for approximately 2
seconds and turns off.
B
If necessary to select audio-only for the tie, press and release the RGBHV and
Audio buttons until the RGBHV LED is off and the Audio LED lights.
C
Press and release the input 5 button. The input 5 LED lights. If the steps in
Example 1 have been completed, the output 3, output 4, and output 8 LEDs
light to indicate ties created in Example 1.
The output 1 LED does not light even if the steps in Example 2 were completed
because Example 2 added a video tie only.
D
Press and release the output 4 button (figure 26). The output 4 LED turns off,
while the output 3 and output 8 LEDs remain lit.