Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
NOTE: Notes provide additional information that could be useful.
CAUTION: Cautions provide important information about an operational requirement.
USB 2.0 RG2224 Product Contents
Your RG2224 is packaged with:
•
Local Extender
•
Remote Extender
•
AC power adapter
•
USB 2.0 Cable
An additional AC power adapter may be purchased for the local extender in the event that your USB port can not supply
the required 500mA current.
Requirements
To complete the installation, you will also require the following items that are not included with the product:
•
USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant operating system
•
USB 1.1 or 2.0 compatible device(s)
•
2-strand fiber optic cable with Duplex LC connectors (if using surface cabling),
or
2-strand fiber optic
cabling with two information outlets and two 2-strand fiber optic patch cords with Duplex LC
connectors (if using premise cabling)
The maximum length of the multimode fiber optic cable (MMF) supported by the RG2224 system, including patch
cords is 500m over OM2 (or greater), or 275m over OM1.
About the USB 2.0 RG2224
The USB 2.0 RG2224 enables users to extend beyond the standard 5m cable limit for USB peripheral devices.
With the RG2224, USB devices can be located up to 500 meters from the computer. The RG2224 is composed
of two individual units: the local extender and the remote extender.
note
note
note
3
The RG2224 includes the ExtremeUSB® suite of features:
•
Transparent USB extension
•
True plug and play; no software drivers required
•
Works with all major operating systems: Windows®, Mac OS X®, and Linux®
