LED Codes
Summit WM3600 Wireless LAN Controller Installation Guide
12
NOTE
During controller start up, the Temperature status LED will be lit Solid Amber. This is normal
behavior and does not indicate an error. At the completion of start up the Temperature Status LED
will switch to Solid Green.
Controller Status (Primary System)
Controller Status (Redundant System)
System Status 1 LED
System Status 2 LED
Event
Off
Off
Power off
Green Solid
Off
No Redundancy Feature Enabled
Green Solid
Green Solid
Redundancy Feature Enabled
Actively Adopting Access Points
Green Solid
Amber Blinking
No License to adopt Access Points
or
No Country Code configured on the
controller
or
License and Country Code configured, but
no APs adopted
System Status 1 LED
System Status 2 LED
Event
Off
Off
Power off
Green Solid
Off
No Redundancy Feature Enabled
Green Blinking
Green Solid
Redundant System failed over and
adopting ports
Green Blinking
Alternating Green
Blinking & Amber
Blinking
Redundant System not failed over.
Содержание Summit WM3600
