Extreme Networks Summit WM3600, Руководство по установке

Страница: 23 / 47

Summit WM3600 Wireless LAN Controller Installation Guide
23
Summit WM3600 wireless LAN controller
Console Port Setup
To add the Summit WM3600 wireless LAN controller to the network and prepare it for
initial configuration:
1
Using the supplied console cable (pictured below), connect the Summit WM3600
wireless LAN controller serial port to an RS-232 (DB-9) serial port on a separate
computer (the “configuration computer”).
The pinout for the RJ-45 to DB9 cable is shown in the following table.
2 On the configuration computer, configure a terminal emulation application
(such as
HyperTerminal ) as follows:
RJ-45
1 2 3 4,5 6 7 8
DB9
8 6 2 5 3 4 7
Terminal Type
VT-100
Port
COM port
Terminal Settings
19200bps transfer rate
8 data bits
no parity
1 stop bit
no flow control
no hardware compression