Extreme Networks IP Service Manager страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 66

background image

4-2

IP Service Manager User Guide

Service Library

Traffic Policies

A traffic policy is similar to an access list in ExtremeWare. You can specify IP, TCP, and
UDP traffic policies to specify the handling of various kinds of traffic. Just like an access
list, you specify source, destination, and precedence for the traffic policies. Unlike access
lists, there is no “deny” or “permit” parameter for traffic policies. The deny/permit
functionality is implemented when you create policy based services. A traffic policy that
is part of a policy based service configured to “block” traffic is equivalent to an access
list set to “deny”. A traffic policy that is part of a policy based service configured to
either “no rate limiting” or “use rate limiting” is equivalent to an access list set to
“permit” (the rate limiting may cause the traffic to be dropped because of congestion,
but that is different from an outright “deny”).

Policy Based Services

A policy based service consists of at least one traffic policy and a specification of the
behavior for the service. A policy based service only applies to the ingress traffic of a
subscriber. The ingress behavior can be set to “blocked”, “no rate limiting”, or “use rate
limiting”. If the “use rate limiting” parameter is set, there must be a loopback
port/VLAN defined for the subscriber that the policy based service is eventually
applied to. Those policy based services set to “use rate limiting” will set one of the QoS
profiles (Qp2 through Qp8) on the subscriber loopback VLAN. You cannot manually
assign which service uses which profile.

Policy based services are not used directly by subscribers, but are part of service
bundles. A single policy based service can belong to more than one service bundle.

Service Bundles

A service bundle can be thought of as the default behavior for a subscriber’s ingress
and egress traffic, modified by any policy based services added to the service bundle.
This service bundle will be associated with a subscriber (created in Service Activation
view), to control the traffic on that subscriber’s port. If there are no policy based
services added to the service bundle, the service bundle sets the behavior for all of the
traffic for a subscriber.

«
...
30
31
32
33
34
...
»

Содержание IP Service Manager



































































Отзывы:

Нет отзывов

Похожие инструкции для IP Service Manager

DL385 - ProLiant - G5

Бренд: XenSource Страницы: 313

Бренд: Valcom Страницы: 5

DRAGON NATURALLYSPEAKING 7

Бренд: ScanSoft Страницы: 222

eXpress Altris eXpress Helpdesk Solution 5.6 SP1

Бренд: altiris Страницы: 143

FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE

Бренд: MACROMEDIA Страницы: 1378

Бренд: Brocade Communications Systems Страницы: 40

Brocade BladeSystem 4/24

Бренд: Brocade Communications Systems Страницы: 62

Fabric OS v7.0.1

Бренд: Brocade Communications Systems Страницы: 1132

CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE

Бренд: Red Hat Страницы: 76

Бренд: GRASS VALLEY Страницы: 8

K2 FCP CONNECT -

Бренд: GRASS VALLEY Страницы: 19

24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD

Бренд: Autodesk Страницы: 11

057A1-05A111-10MD - AutoCAD LT 2009

Бренд: Autodesk Страницы: 31

12909-091452-9750 - Map 3D 2006 Student Edition

Бренд: Autodesk Страницы: 35

057A1-05A111-10MB - AutoCAD LT 2009

Бренд: Autodesk Страницы: 58

BREEZE-CLUSTERING BREEZE LIVE

Бренд: MACROMEDIA Страницы: 10

PHOTO EXPRESS MD 5345

Бренд: Ulead Страницы: 43

Voluntary Community Assistance Network V-CAN

Бренд: IBM Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды