Extreme Networks ExtremeWare 7.0.0, Справочник по командам

Страница: 210 / 1598

210 ExtremeWare Software 7.0.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
show ports info
show ports {<portlist>} info {detail}
Description
Displays detailed system-related information.
For PoS modules, displays port information that includes new DiffServ and RED configuration
parameters.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not specify a port number or range of ports, detailed system-related information is displayed
for all ports. The data is displayed in a table format.
On a modular switch,
<portlist>
can be a list of slots and ports. On a stand-alone switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see “Modular Switch
Numerical Ranges” or “Stand-alone Switch Numerical Ranges” in Chapter 1.
This status information may be useful for your technical support representative if you have a network
problem.
For version 6.0 and higher:
• The
detail
parameter is used to provided more specific port information. The data is called out
with written explanations versus displayed in a table format.
Example
The following command displays port system-related information:
show ports info
Following is the output from this command:
Port Diag Flags Link Link Num Num Num Jumbo QOS Load
State UPs STP VLAN Proto Size
29 P e--m-------E ready 0 1 1 1 9216
30 P e--m-------E ready 0 1 1 1 9216
31 P e--m-------E ready 0 1 1 1 9216
32 P e--m-------E active 1 1 1 1 9216
33 P e--m-------E ready 0 1 1 1 9216
34 P e--m-------D ready 0 1 1 1 9216
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
detail Specifies detailed port information. (6.0 and higher)