Extreme Networks ERS 3524GT Скачать руководство пользователя страница 6

Страница: 6 / 47

Chapter 1: Preface

Purpose

This document provides conceptual information and installation procedures for the switch hardware.

Training

Ongoing product training is available. For more information or to register, you can access the Web
site at

www.extremenetworks.com/education/

Providing Feedback to Us

We are always striving to improve our documentation and help you work better, so we want to hear

from you! We welcome all feedback but especially want to know about:

• Content errors or confusing or conflicting information.
• Ideas for improvements to our documentation so you can find the information you need faster.
• Broken links or usability issues.

If you would like to provide feedback to the Extreme Networks Information Development team about

this document, please contact us using our short

online feedback form

. You can also email us

directly at

[email protected]

Getting Help

Product purchased from Extreme Networks

If you purchased your product from Extreme Networks, use the following support contact information

to get help.

December 2017

Installing Ethernet Routing Switch 3500 Series

Содержание ERS 3524GT
















































Результаты поиска

Содержание ERS 3524GT

Отзывы:

Похожие инструкции для ERS 3524GT

Бренды по названию

Популярные бренды

Extreme Networks ERS 3524GT, Руководство по установке

Результаты поиска

Содержание ERS 3524GT

Отзывы:

Похожие инструкции для ERS 3524GT

Бренды по названию

Популярные бренды