Table 12: Installation prerequisites (continued)
Task
num
ber
Task
Task details or additional information
Completed
5
Assign a password for additional
access security. No default
password is assigned to the CLI.
Extreme SLX-OS Management Configuration Guide
6
Before attaching equipment to
the device, you must configure
an interface IP address to the
subnet on which the device will
be located. Initial IP address
configuration is performed using
the CLI with a direct serial
connection.
Extreme SLX-OS Management Configuration Guide
7
Connect an Ethernet connection
to the system.
Refer to
Establishing an Ethernet connection
8
Test IP connectivity to other
devices by pinging them and
tracing routes.
Extreme SLX-OS Management Configuration Guide
9
Continue configuring the device
using the CLI.
Extreme SLX-OS Management Configuration Guide
10
Secure access to the device.
Extreme SLX-OS Management Configuration Guide
Shipping carton contents
When unpacking the device, verify that the contents of the shipping carton is complete. Save the
shipping carton and packaging in the event you need to return the shipment.
•
The SLX 9640 Switch Router comes with an accessory kit containing the following items:
◦
XBR-R000297 four-post rack mount kit
◦
Serial cable with an RJ-45 connector
◦
Two 6-ft. power cord
◦
Power cord retainer clip
◦
Rubber feet, required for setting up the device as a standalone unit China-RoHS Hazardous/Toxic
Substance statement
◦
EULA/Read-Me document
◦
USB drive, 8G
Preparing for the Installation
Shipping carton contents
ExtremeRouting SLX 9640 Hardware Installation Guide
21
