Related links
on page 36
Port LED state indicators
This section describes the port LED state indicators by color and fluctuation cues.
Note:
Indicator states are applicable to all models of VSP 4000 switches.
The following list describes the three port LEDs:
• Activity indicates the level of activity on the link.
• Link indicates the presence of an Ethernet link.
• Speed indicates the port speed (for example, 10 Mbps, 100 Mbps, 1000 Mbps).
Table 17: RJ45 Port LED state indicators
Label
Color and Status
Description
Speed/PoE+
Green, Blink
The port is set to operate at 1000 Mbps with PoE.
Green, Steady
The port is set to operate at 1000 Mbps without PoE
+.
Amber, Blink
The port is set to operate at 100 Mbps with PoE+.
Amber, Steady
The port is set to operate at 100 Mbps without PoE
+.
Amber, Green Pulse
The port is experiencing a PoE+ error.
Off
When the Link/Activity LED is green and the Speed
LED is off, the port is set to operate at 10 Mbps for
all models.
Link / Activity
Green, Steady
The link established but no data activity exists.
Green, Blink
The link is established and data activity exists (the
blink rate indicates the level of activity).
Green, Slow Blink
The port is administratively disabled.
Off
Local/remote fault.
Table 18: SFP/SFP+ transceiver Port LED state indicators
Label
Color and Status
Description
In Use
Green, Blink
Not applicable.
Green, Steady
The SFP port and the transmit port are active.
Amber, Blink
Not applicable.
Table continues…
LED state definitions
August 2018
Installing Virtual Services Platform 4850GTS Series
39
