Update the Country Code
About This Task
If your access point is configured for the World Regulatory domain, it is important to set the country
code to the country in which the access point will be deployed to meet regulatory requirements and for
optimal wireless operation.
Note
The country code selection is for world models only and is not available to United States
(FCC), Canada (CAN), and other country-specific models. Per Federal Communications
Commission (FCC) regulations, all Wi-Fi products marketed in the United States must be set
to U.S. channels only.
Procedure
1. Power on the acess point.
2. Allow the access point to find and connect to ExtremeCloud IQ.
When the access point is connected, it appears in the table of devices in the
Manage > Devices
window.
3. Select the check box next to the access point, and then select
Assign Country Code
from the
Actions
drop-down list.
4. In the dialog box, select the appropriate country from the drop-down list, and then select
Save
.
5. Upload your changes to the device.
AP460C, AP460S6C, and AP460S12C Features
The access points have the following features:
•
Radios:
◦
Three 802.11a/b/g/n/ac/ax radios (one 4×4 radio, one 2×2 radio, and one 1×1 scanner radio)
◦
One Bluetooth Low Energy (BLE) radio
•
Two RJ45 Ethernet ports (ETH0 and ETH1):
◦
100/1000/2500 Mbps auto-negotiation RJ45 Ethernet Power over Ethernet (PoE) port
◦
10/100/1000 Mbps auto-negotiation RJ45 Ethernet port
•
One micro USB console port
•
One reset button
Remove the waterproof screw cap to access the micro USB port and the reset button.
•
One standard USB port to connect beacons (iBeacon) and Internet of Things (IoT) devices
Remove the waterproof cap to access the standard USB port.
Note
The hardware components are similar for AP460C, AP460S6C, and AP460S12C access points.
Update the Country Code
AP460C, AP460S6C, and AP460S12C Overview
10
ExtremeWireless™ AP460C, AP460S6C, and AP460S12C Access Points
