2
Customer Service: [email protected] | www.extrememax.com
Installation Instructions
Read all information included on page 1 before beginning operation or installation.
Blade Assembly
1. Position the reversible wear bar (2) in front of the UniPlow blade (1). Align the mounting holes at the bottom
edge of the UniPlow blade. Place a 5/16”-18 x 1.25” carriage bolt (28) through the wear bar and blade at each
of the nine mounting hole locations.
2. Determine the desired placement for the skid pads (27) along the base of the blade. Skid pads may be
positioned at either the 1st and 9th wear bar bolt holes or the 2nd and 8th wear bar bolt holes. Place the skid
pad onto the open bolt threads at the back of the blade with the end pointing away from the face of the blade.
Use the skid pad’s bolt channels to set them to the desired height.
3. Secure all nine bolts with a 5/16”-18 lock nut (29).
Warranty
This product is warranted for consumer use for 2 year after the date of retail purchase. Warranty includes parts only.
Warranty valid only in the USA.
This product is warranted to the original retail purchaser to be free from defects in material and workmanship, ordinary
wear and tear expected. This warranty shall not apply to any defects caused by: (I) overloading, (II) physical abuse
of goods or any acts of vandalism by any person, (III) improper installation or use contrary to the instructions, (IV)
commercial use. The sole remedy under this warranty is at the discretion of manufacturer: the replacement of the same
or similar product, or the refund of the original purchase price. Extreme Max™ is not responsible for any consequential or
incidental damages. Any and all freight charges to handle warranty claims are the responsibility of the consumer. Extreme
Max™ is not responsible for any labor charges that may be incurred.
To submit a warranty claim please send your name, mailing address, original retail sales receipt, and summary of alleged
defect to [email protected].
1
28
27
2
29
