Extreme Home Arcades Classic series Скачать руководство пользователя страница 83

Страница: 83 / 86

Warranty Policy

The Purpose of Warranty

Warranty assures the purchaser that should a defect in material or workmanship occur during the

warranty period (1 Year), (Dream Home Arcades LLC) will assume specific repair responsibilities, as listed in

the warranty statement.

The warranty statement is to be provided to each purchaser of each piece of new (custom)

equipment. Subject to the respective provincial law warranty begins on the date the product is

delivered to the original purchaser of the product

Once the warranty period has begun, it cannot

be stopped or interrupted.

Dream Home Arcades LLC Responsibilities

The following responsibilities are to be performed when the dealer delivers a product to the

purchaser or otherwise places it into warranty service:

Review warranty statement, operator’s manual and understanding of purchaser’s responsibilities as related to

warranty,

service and the proper and safe operation of the product. Purchasers should be advised to

have failed parts repaired or replaced immediately upon failure and that continued use

will result in additional damage and excessive wear.

Contact manufacturer (Dream Home Arcades LLC) prior to beginning repair or replacement of failed parts to

make

certain that the cost of repairs are consistent with the value of the product when sold.

Warranty requests for units in dealer’s inventory may be submitted to (Dream Home Arcades LLC) when

defects are noted in products prior to the retail sale of the unit.

Provide warranty and service repairs as directed by (Dream Home Arcades) Service Repair bulletins

or other instructions.

No warranty will be allowed on units delivered to the retail customer prior to the full

payment of that unit to the manufacturer by the dealer.

Reimbursement for parts used in warranty repair will be credited only when the parts are purchased from

(Dream Home Arcades LLC).

Labor is not paid on the warranty associated with repair parts purchased by the retail customer that are used on a

product

that is not currently in warranty time frame.

83 |

P a g e

Содержание Classic series























































































Результаты поиска

Содержание Classic series

Отзывы:

Похожие инструкции для Classic series

Бренды по названию

Популярные бренды

Extreme Home Arcades Classic series, Руководство по эксплуатации

Результаты поиска

Содержание Classic series

Отзывы:

Похожие инструкции для Classic series

Бренды по названию

Популярные бренды