Extreme Flight RC EXTRA 300 EXP V2, Инструкция по сборке

Страница: 5 / 30

www.modellmarkt24.ch; www.modellmarkt24.de
5
Elevator-please note the elevator/stab assembly on the V2 version of
the Extra is now a single piece unit that is permanently glued to
the airframe and uses a single servo for elevator actuation.
1. Locate the horizontal stabilizer/elevator assembly as well as the composite control horns
and base plates from the elevator hardware package. Use a sharp #11 blade to make a cut
in the covering over the 2 slots for the elevator control horns on the bottom of the elevator
surface. Double check to make sure you are cutting into the bottom of the elevator.
2. Insert the 2 control horns into the base plate and trial fit the horns into the slot and
make sure they seat properly against the base and elevator surface. Trace around the
base plate with a felt tipped marker.
www.modellmarkt24.ch; www.modellmarkt24.de