Extraflame Vicenza V3.4, Инструкция по установке и эксплуатации

Страница: 24 / 96

24
W415-1598 / 06.01.16
if the remote control is off because it has no batteries, the appliance can be controlled from the control panel
on top of it.
While replacing the battery, pay attention to the polarity by observing the symbol on the inside compartment
of the remote control.
The batteries used contain metals harmful for the environment. They must therefore be disposed of
separately in appropriate containers.
8.0 ThE REMOTE CONTROL
The remote control can adjust all normal functions implemented through the lCD.
The table below provides a detailed description of the various functions:
INFO
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15
16
1 ON / OFF Pressing the key for three seconds, the appliance will switch on or off
2 POwER iNCREAsE Pressing the key will increase the operating power
3 POwER DECREAsE Pressing the key will decrease the operating power
4 T° iNCREAsE The temperature setting can be increased by pressing this key
5 T° DECREAsE
The set temperature can be decreased by pressing this key
6
ENABLE / DisABLE
ChRONO
Pressing the key once will enable or disable the chrono
7
DELAyED swiTCh-OFF
ENABLiNG
The delayed switch-off can be set by pressing this key.
For example, if the appliance is set to switch off in an hour, it shall switch
off automatically once the set time elapses, displaying the countdown
every minute for delayed automatic shutdown.
8 MENu
This key allows to access the user and technical menu (the technical
menu is reserved for assistance)
9 iNCREAsE The temperature setting can be increased by pressing this key
10 EsC kEy
The key allows the user to exit any program or display and returns to the
main menu without saving the data
11 BACk The key returns to the display of the various menus
12 CONFiRMATiON kEy
This key confirms the adjustments made during the user menu
programming phase
13 FORwARD The key allows to go forward in the various menus
14 ENABLE FuNCTiON F1 Pre-set key for future applications
15 DECREAsE The key decreases the value to be set
16 APPLiANCE sTATus
Pressing this key will display the general status of the appliance
8.1 TyPE AND REPLACEMENT OF BATTERiEs
The batteries are housed in the lower part of the remote
control.
To replace them, remove the battery holder (as indicated in
the figure at the back of the remote control), remove or insert
the battery following symbols on the remote control and on
the battery.
For operation, 1 CR2025, 3V lithium buffer battery is
required, see "COMMissiONiNG sETTiNGs" section.
important note: the numbers shown on the remote control are purely indicative and are not present on the remote control supplied with the product.