Extraflame Marilena Plus AD, Руководство пользователя

Страница: 20 / 36

20 ENGLISH
enabling/Disabling the Chrono
CONTrOls prOCeDUre
Š
press 6.
Š
press 3 until cHrono appears and confirm by pressing key 6.
Š Confirm
EnABLing
by pressing 6.
Š Use keys 4 -5 to enable (
on
) or disable (
oFF
)
Š press 6 to confirm or 1 to return to the previous menus to the initial state.
J
if the weekly Chrono is aCtive on the Control panel, a sMall iCon is DisplayeD
cHrono > EnABLing > Prg1
On/off Enable/disable PRG 1
>
Prg2
On/off Enable/disable PRG 2
>
Prg3
On/off Enable/disable PRG 3
>
Prg4
On/off Enable/disable PRG 4
Prg1 > STArT Prg1
OFF-00:00 Ignition time PRG1
>
SToP Prg1
OFF-00:00 Switch-off time PRG1
>
monDAY...SUnDAY
On/off Enable/disable the days of PRG1
>
SET Prg1
LOW-TA - 07- 37 °C - HOT Set thermostat PRG1
>
PowEr Prg1
1-5 Set power PRG1
Prg2 > STArT Prg2
OFF-00:00 Ignition time PRG2
>
SToP Prg2
OFF-00:00 Switch-off time PRG2
>
monDAY...SUnDAY
On/off Enable/disable the days of PRG2
>
SET Prg2
LOW-TA - 07- 37 °C - HOT Set thermostat PRG2
>
PowEr Prg2
1-5 Set power PRG2
Prg3 > STArT Prg3
OFF-00:00 Ignition time PRG3
>
SToP Prg3
OFF-00:00 Switch-off time PRG3
>
monDAY...SUnDAY
On/off Enable/disable the days of PRG3
>
SET Prg3
LOW-TA - 07- 37 °C - HOT Set thermostat PRG3
>
PowEr Prg3
1-5 Set power PRG3
Prg4 > STArT Prg4
OFF-00:00 Ignition time PRG4
SToP Prg4
OFF-00:00 Switch-off time PRG4
monDAY...SUnDAY
On/off Enable/disable the days of PRG4
SET Prg4
LOW-TA - 07- 37 °C - HOT Set thermostat PRG4
PowEr Prg4
1-5 Set power PRG4
Chrono
This function allows you to program the stove to switch on and off automatically.
The factory setting for cHrono is off.
The chrono allows you to program 4 time slots within a day to be used for every day of the week.
in each time slot, it is possible to set the ignition and switch-off times, the days of use of the programmed time slot, the desired
temperature and the set power. the current date and time setting is essential for the correct operation of the timer.
recommendations
Before using the chrono function, you must set the current day and time, so check that you have followed the points listed in the sub-
chapter “DATE-TimE”. To make sure that the chrono function works properly, as well as programming it, it is also necessary to activate it.
The 4 time slots can be overlapped by setting the ignition and switch-off times. in this way, a combination of times is obtained in which
it is possible to set different temperatures and powers without affecting the operating status of the stove.
n.B.: if there are overlapped time slots, the product will remain on until the furthest switch-off time.