8
VB500-EU-EN-V1.2-10/11
Set Metric or Imperial Units
1.
Access the uit parameter.
2.
Use the arrow buttons to select mm/s
2
or ft/s
2
3.
Press ENTER to confirm selection.
4.
Press and hold the SET button for 3 seconds to exit to the normal operation mode (or simply
wait 7 seconds for the meter to automatically switch to the normal operating mode).
System Reset
If the meter’s keys become inoperable or if the display freezes, the Reset button can be used to
reset the instrument.
•
Use a paper clip or similar item to momentarily press the reset button located on the upper right
side of the instrument.
•
After pressing the Reset button, switch the instrument ON by pressing and holding the POWER
key for 3 seconds. If using the power adaptor unplug the adaptor and then plug it back in again
to power the meter.
Audio Output
The Audio Output provides a means to hear the vibration on channel 1.
