11
VB500-EU-EN-V1.2-10/11
SD Data Card to PC Data Transfer
1.
Complete a datalogging session as detailed in above in the previous sections. Hint: For the
first few tests, simply record a small amount of test data. This is to ensure that the datalogging
process is well understood before committing to critical, large scale datalogging.
2.
With the meter switched OFF, remove the SD Card.
3.
Plug the SD Card directly into a PC SD card reader. If the PC does not have an SD card slot,
use an SD card adaptor (available at most outlets where computer accessories are sold).
4.
Power the PC and run a spreadsheet software program. Open the saved documents in the
spreadsheet software program (see example spreadsheet data screen below).
Spreadsheet data example
AC Power Adaptor
This meter is normally powered by eight (8) 1.5V ‘AA’ batteries; however a 9V power adaptor is
supplied. When the adaptor is used, the meter is permanently powered and the power button will be
disabled. Connect the adaptor on the right side of the meter to the 9VDC jack.
