HD600-EU-EN v1.3 07/13
6
MAX / MIN
In the MAX/MIN mode the meter will display and hold either the maximum or minimum reading. The
display will update only when the measured value exceeds the value presently in the display.
1.
Press the MAX/MIN button and the MAX icon will appear on the display. The reading displayed
is the highest reading encountered since the MAX mode was entered.
2.
Press the MAX/MIN button again. The MIN icon will appear on the display. The reading
displayed is the lowest reading encountered since the MIN mode was entered.
3.
Press the MAX/MIN button again to exit the MAX / MIN display mode.
RECORDING DATA
The meter can store up to 20,000 readings at an interval rate of 1 to 59 seconds. Each recording
session is saved as a data set and each record is saved with a date and time stamp. This data can
be downloaded using the supplied software.
Setting the interval time
1.
Press and hold the button while turning the meter ON.
0001
and
Int
will appear in the
display.
2.
Press the LEVEL button to set the sample interval from once per second to once per 59
seconds.
3.
Press the HOLD button to save the interval setting and exit the setting mode.
Recording readings
1.
Press the REC button to begin recording. The
REC
icon will appear on the display.
2.
Press the REC button again to stop recording.
3.
Auto Power OFF is disabled when the record function is active.
Clearing Stored readings
1.
Turn the meter OFF.
2.
Press and hold the REC button while turning the meter ON.
3.
When (clear) appears on the display, release the REC button.
4.
All of the readings that were stored in memory are now erased.
BACKLIGHT
Press the button to turn the LCD backlight on or off. To conserve battery life, the backlight will
automatically turn off after approximately 30 seconds.
AUTO POWER OFF
The meter will automatically shut off after approximately 15 minutes of inactivity. Press the SETUP
button to disable the auto-power-off feature. The
icon in the display indicates that the auto power
off feature is active.