EA10 V2.0 3/06
4
Support line (781) 890-7440
Technical support: Extension 200; E-mail: [email protected]
Repair & Returns: Extension 210; E-mail: [email protected]
Product specifications subject to change without notice
For the latest version of this User’s Guide, Software updates, and other
up-to-the-minute product information, visit our website: www.extech.com
Extech Instruments Corporation, 285 Bear Hill Rd., Waltham, MA 02451
Data Hold
Press the
HOLD
button to freeze the reading in the display. The 'H' hold icon will appear
on the upper left-hand side of the display. Press the HOLD button again to return to normal
operation (the 'H' hold icon will disappear).
Offset
The Offset Mode permits the user to store the temperature reading as a reference value
and compare this reference value to subsequent temperature readings. In Offset mode, the
meter displays the actual measured temperature minus the stored reference value.
Press the
OFFSET
button to store the currently displayed temperature readings and enter
the Offset mode. “OFFSET” will appear in the display.
Press the OFFSET button to exit the mode.
Backlight
Press the backlight button to turn on the LCD display backlight. The backlight will
automatically turn off after one minute or press the button again to turn the light off.
Auto Power OFF
The meter will automatically turn off after 30 minutes if no keys are pressed during this
period. Auto power off is disabled in the max/min recording mode.
Turning Power OFF
Press the button to turn power off.
Calibration and Repair Services
Extech offers complete repair and calibration services
for all of the products we sell.
For periodic calibration, NIST certification or repair of this Extech product, call customer
service for details on services available. Extech recommends that calibration be performed
on an annual basis to ensure calibration integrity.
Copyright
©
2006 Extech Instruments Corporation.
All rights reserved including the right of reproduction in whole or in part in any form.