APEX 4 User’s Guide
Rev 1.0
7
1.2.2 Charging the Battery
For optimal performance, we recommend charging the battery twice before initial use. Charge
the battery for 3 hours; disconnect power adaptor, reconnect and charge again. After this initial
charge, charge the battery for 180 minutes whenever the low battery indicator comes on or as
directed by you IT team.
Follow the next procedure for charging the battery:
Plug battery charger adaptor output cable in the battery charger connector as shown in
Figure
3
.
Plug battery charger adaptor into the appropriate AC line voltage socket.
Battery LED will illuminate amber indicating that the battery is being charged.
The battery will be fast charged and after about 180 minutes the Battery LED will turn off
To remove the battery cartridge, open the battery door and tip the battery out of the
printer.
FIGURE 3: CHARGING THE BATTERY CARTRIDGE
Note: To ensure a full charge do not operate the printer while charging.
Note: The wall mounted charger is a Class II equipment. Multiple plug configurations comply
with most international standards. The wall mounted charger is not supplied with plugs for use in
Korea.
Model
APEX 4
Input Voltage/Current
100-240 VAC/ 0.4A
Input Frequency
47-63 HZ
