480836 V5.0 8/09
16
4-7 Storing readings
The meter includes a non-volatile data memory that can store a maximum of 99
measured values.
4-7-1 Storing individual measured values
MEM
The current memory location number appears in the lower right small display.
Once you press the
MEM
key, it will store a displayed value and increment the memory
location by one. Each flash of the “ ” symbol display indicates one reading has been
stored. When the memory location number shows “99”, to indicate the manual data
memory is full, the use must clear the entire contents of the data memory before storing
new values.
4-7-2 Reading individual measured values
READ
Z
X Y
R
V/m
UNIT
READ
MEM
R
X Y
Z
A/m
UNIT
1. Press
READ
key, the display shows “
”(reading mode).
2. Press
▼
or
▲
key to select the desired memory location.
3. Press
UNIT
key to select the desired reading units.
4. Press
MODE
key to select the desired sensor axis reading.
5. Press
MAX
key to exit.
