V4.0 5/07
16
REPLACING THE BATTERY
WARNING
: To avoid electric shock, disconnect the test leads
from any source of voltage before removing the battery cover.
1. When the battery becomes exhausted or drops below the
operating voltage, The symbol will appear in the LCD
display when the battery check button is pressed. The battery
should be replaced.
2. Remove the two screws “B” securing the rear battery cover, lift
the cover off and replace the battery.
3. Replace and secure the battery cover.
4. Properly dispose of the old battery.
WARNING:
To avoid electric shock, do not operate your meter
until the battery cover is in place and fastened securely.