manualshive.com logo in svg

Extech Instruments 382065, Руководство пользователя

Поделиться
Скачать
Extech Instruments 382065 Скачать руководство пользователя страница 22

Model 382068   V3.0   4/2005 

22 

6 

 
 
 

7 

3 

 
 
 

4 

 
 
 

 
 
 
5 

1          2 

Memory Window

 

1.  REMAIN – Meter’s available memory.  
2.  ID Code – User selectable reference number. Type number in the yellow field below 

the ID CODE button then press the ID CODE button to confirm. 

3.  MEMORY – Total meter memory (amount of memory available when no readings are 

stored in the logger). 

4.  REAL TIME CLOCK – Click on this bar to display the PC system clock in the field 

below the REAL TIME 
CLOCK button. 

5.  List of downloaded data sets: 

Recording time shows the 
date and time of data 
recording, FUNC1 and 
FUNC2 show the 
measurement types for the 
recorded data, and Records 
indicates how many readings 
are in the set. 

6. Download 

status. 

7. 

Sampling – Datalogger 
Sample rate (rate at which 
meter will record readings 
remotely). With the meter 
connected, click in the yellow field below the SAMPLING button and type in the desired 
sampling rate. Click the Sampling button to confirm. 
NOTE: This differs from the Sampling rate in the Main Software screen. The Sampling 
rate in the Main Software window is the rate that the PC records the measurements 
made by the meter while connected to the PC (this is known as data acquisition).   

 

Measuring and recording readings with meter connected to PC 

1.  With the meter connected to the PC and with the meter and the program running, click 

the SAVE AS button on the Main Software window.  

2.  Type a filename when prompted and click OK. 
3.  The filename will appear on the Main Software window and the computer will begin 

storing the meter readings in real time to the file named in above step. 

4.  The Main Software window will display the meter readings and the number of records 

recorded. 

5.  To change the rate at which the readings are taken, click on the yellow field below the 

SAMPLING button. Type in the desired sample rate when prompted. 

6.  Click STOP RECORDING button on the Main Software button when desired. The data 

will remain in the file named earlier. Open the file at a later time using the OPEN FILE 
button on the Main Software window. 

 

Remotely datalog readings with the clamp meter 

1.  Press and hold the RECORD button on the meter until the audible tone beeps twice. 
2.  The meter will begin recording at the rate programmed in the MEMORY window (not 

the Main Software window). 

3.  The RECORD display icon will switch on during the recording session. 
4.  Press and hold the RECORD button until one audible tone beeps to stop recording. 

The RECORD display icon will switch off. 

www.burntec.com

Содержание 382065



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды