12
English
Seriell RS
-
422/485 PCI Board
•
Turn the system power OFF before installation!
•
Use static electricity discharge precautions.
•
Remove the chassis cover from your computer
•
Locate an unused PCI slot (typically white or ivory) and remove the correspond-
ing slot cover from computer chassis.
•
Plug the RS422/485 PCI card to the unused PCI expansion slot and attached
the I/O card bracket to the computer chassis screw.
•
Put the chassis cover back on the computer.
•
Turn ON the power of your computer and peripherals.
•
Proceed with Software Driver Installation.
PLEASE DO NOT LET WINDOWS AUTO SEARCH THE DRIVERS ON THE CD,
it
will cause problems because the INF files will be conflict in this case. Instead, please
browse to the correct location (folder) manually to make sure the correct drivers are
chosen and installed correctly.
Note:
4.
Hardware Installation
5.
Driver Installation
Drivers are in each corresponding folder
