e
XS 5001A Tech Manual
24
Figure 20
Traffic control:
The NODE support the ability to specify the average and maximum
throughput a user can enjoy on the wired AND wireless access interfaces in
the repeater mode and the settings will only affect the wireless interface in
the Gateway mode.
The mesh will not be affected by the traffic control setting.
If VoIP is going to be implemented on the mesh it is not recommended to
specify anything less than 90 kbps for the traffic control.
There are 3 levels of service possible: Gold, Silver and Bronze. Each level
average rate and maximum burst rate are settable. It is not advisable to set
the Average rate below 64 kbps.
