e
XS 5001A Tech Manual
46
Furthermore, Transmit Power Control (TPC) is NOT required for
systems radiating less than 500 mW (27 dBm) E.I.R.P. in the 5.25-
5.35GHz band (which is generally true for the
e
XS 5001A).
Part 15.407: RF Transmission Auto-control
This device is in compliance with FCC 15.407(c). It automatically
discontinues transmission in case of either absence of information to
transmit or operational failure.
Data transmission is always initiated by software. The data is either
subscriber data or small amounts of network control and signaling
information. The data passes down to the Media Access Control logical
layer to the RF transmitter. The RF transmitter is ON only when
passing these data packets out to the antenna. The transmission
turns OFF at the end of each individual packet. If there is an
operational failure, no data packets are transmitted.
