EN
Seite | 22
16
Troubleshooting
Error
Possible reason
Solution
The blender is
not functioning
The jug is not sitting correctly on the
drive unit.
Set the speed control to level "0" and
unplug the power cord from the
socket.
Put the jug on the drive unit, as
described in "Compose blender".
The security cover does not sit correctly
on the mixing bowl.
Set the speed control to level "0" and
unplug the power cord from the
socket.
Place the safety lid on the blender jug,
as described in "Compose blender “.
The power cord is not properly
connected in the socket.
Connect the power cord correctly to a
socket.
The socket has no electricity.
Check the socket by connecting
another device.
Missing/not fully inserted battery
Inserting the battery into the battery
connection
Appliance overheated
(4 red flashing lights)
Turn the speed controller to “OFF”,
remove the battery and allow it to cool
down before using the appliance
again.
Appliance malfunction / damaged
battery
Turn the speed controller to “OFF” and
remove the battery. Contact a
qualified person to have the appliance
inspected.
The blades do
not rotate.
Empty battery
(1 red flashing light)
Turn the speed controller to “OFF”,
connect the charger cable to the
charger socket, and then the charger
to a mains plug socket. Put the
appliance into operation again as soon
as the battery is fully charged.
Motor overloaded
(4 red flashing lights)
Turn the speed controller to “OFF”,
remove the battery and allow the
appliance to cool down.
Battery cannot
be charged
Mains plug is not correctly plugged into
the plug socket.
Connect the mains plug to a plug
socket in the prescribed manner.
Damaged battery / damaged charger
cable
Disconnect the charger from the mains
plug socket, then the adapter plug
from the charger socket, remove the
battery and contact a qualified person
to have the appliance inspected.
When in doubt, consult a qualified expert.
Содержание MU 8401swi
Страница 5: ...Seite 5 ...
Страница 6: ...Seite 6 Abb 1 Abb 2 Abb 3 Abb 4 Abb 5 Abb 6 Abb 7 Abb 8 ...