WARNING
Close the cable clamp after making the
electrical connection. Close the terminal
board cover by twisting it down.
Recommended installation
Wood block
6
≥
600
450
580
560
490
510
52 46
Ventilation slot
≥
mm
30
50mm MIN.
Heat outlet
5mm MIN.
Brackets
OR
Screw
200
50
200
Front edge of worktop
Rear wall
The manufacturer refuses all responsibility if the standards in force are not respected.
TECHNICAL INFORMATION FOR INSTALLATION PERSONNEL:
This appliance must be installed only by authorised personnel and in accordance with the
regulations of Electricity authorities. The wall and bench surfaces must be capable of sustaining
temperatures of 95 degrees Celsius. All laminates, fixing adhesive and surfacing
materials should be certified suitable for this temperature. Do not install it in the unfireresistant
place (like curtain etc). When you operate, the manufacturer has no responsibility.
According to the picture as follows, cut the square hole in bench and place the built-in electric hob in it.
Your hob can be fitted to any worktop with a thickness of 40 to 50 mm.
