‘EXPOSED RACKS’ INSTALLATION GUIDE [8-00-9654-BK, 8-00-9754-BK, 8-00-9754-RD, 8-00-9656-BK, 8-00-9756-BK, 8-00-
9756-RD] FOR 2018 – PRESENT JL (2 dr) & JLU (4dr) JEEP WRANGLER WITH SOFT TOP
v.
2019M04D15V2
STEP 3a – INSTALL MID BRACKETS BOLTS FOR JLU (4DR) (8-00-9911) *
FOR JL (2DR), SKIP TO STEP 3b
Hardware:
8)
For Bolt Position 3, Follow steps 1-7 above
9)
For Bolt Position 4, leave the JEEP OE bolt in place!
You will use the EXR Bolt in the larger hole directly behind
the Jeep OE Bolt
*This is very similar to the other bolts, except you use
a large flat washer (F) and rubber washer (G)
included with the Mid Brackets Kit (8-00-9911)
a.
Place (F) and (G) on Bolt (A), then slide bolt
up through the ¾” hole such that the rubber
washer sits against the painted Jeep frame.
b.
On the top side, place (G) and (F) on top of
the bolt such that the rubber washer sits
against the painted Jeep frame
c.
Loosely tighten down (B) nut on top of the
bolt. Center bolt. Tighten further, but do
not overtighten.
10)
Follow Steps 4-7 (as above) to secure brackets. See
below for Bolt / Bracket Positions
a)
b) & c)
10)
