2.1
MOUNTING
HANGING
The fixture can be mounted in a hanging position using the
supporting bracket. The bracket should be secured to the
mounting truss or structure using a standard mounting
clamp. Please note that when hanging the unit a safety
cable should also be used.
@ 220V: 50 units may be connected in series
@110V: 25 units may be connected in series
The LED MODULE can be mounted at any angle and in any
position. It is possible to further adjust the angle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
2.2
POWER CONNECTIONS
Note:
If the signal cable is over 60m between the DMX512 controller and fixture or beween two fixtures, then a DMX
signal amplifier is needed as well.
2
INSTALLATION
