Expobar Quartz Classic One Touch, Техническое руководство

Страница: 24 / 52

24
QUARTZ
CLASSIC
Replacing the group gasket
Cleaning the group gasket and capsule holder
Reassembling the group gasket
01 02 03
Push the metal tension ring
back (shown in blue), using
thumbnails or a plastic tool,
until it slides off of the gasket. After the tension ring releases,
pull the gasket forward from
one edge until it releases from
the capsule holder. Turn the machine off at the
main power switch and then
open up the capsule group.
i
Note:
To remove the group gasket, the
machine must cool to room temperature.
WARNING!
Beware of the sharps inside the
capsule holder to avoid injury.
CLEANING AND MAINTENANCE
Important:
The widest part of the gasket must be facing
forward when reassembling the gasket.
1. Hold the capsule group lever open with one hand to keep
the capsule holder stable. With the other hand place the
gasket on the capsule holder with the lip seated at the
bottom first. Then press the gasket onto the holder, working
around until it is completely seated.
2. Pull the metal tension ring up onto the gasket to hold it in
place. Ensure the ring is aligned evenly.
3. Raise and lower the capsule lever a few times ensure the
gasket is properly seated before making the next coffee.
01 02
Clean the capsule holder with warm water and a brush.
Clean the gasket with water and a brush, then rinse with
clean water before reinstalling.