Expobar Quartz Classic One Touch, Техническое руководство

Страница: 11 / 52

11
QUARTZ CLASSIC
Remove the cover plug for the inlet valve and connect
the included inlet hose. The machine will now
automatically fill the internal water tank to
minimum level + 40mm, when water goes below
minimum level it will refill again, etc.
Bend the flange (shown in yellow) inward to make
room for the inlet tube.
03 04
INSTALLATION AND START-UP
Installing the drip tray drain
The drip tray can be connected to a plumbing drain, allowing the tray to be emptied much less frequently
(a domestic drain connection is required for this). To use this feature, follow the connection procedure
explained below.
Note:
The drain pipe system can be used when the machine is connected to the domestic water supply
or the internal water tank.
WARNING!
The holes drilled in the drip tray or capsule drawer should be
≤
3mm to avoid leaks.
Remove the drip tray. Drill a 3mm hole in the
bottom of the capsule
box as shown above.
Reinstall the capsule
box when finished.
Connect the included
corrugated drain tube
to the drain cup.
Drill a 3mm hole in
the bottom of the drip
tray as shown above.
Reinstall the drip tray
when finished.
01 02 03 04
i
Max.
Ф: 3mm
Max.
Ф: 3mm