Explore Scientific BCR2001, Инструкция по эксплуатации

Страница: 6 / 68

6
GETTING STARTED
INSTALLATION AND SETUP
CHARGING THE BATTERY
1. Before using, fully charge the battery using the USB
cable provided. Plug into any USB port that supplies
power (Laptop, Computer, AC Charger, Car Charger,
etc.).
2. A solid red LED light shown indicates that the speaker is
charging, it will turn off when fully charged.
Please use a compatible and certified
charger to charge the device.
PREPARING THE ANTENNA
For better radio reception, fully extend the antenna.
NOTE : To prevent interference, position the antenna as far
as possible from any other radiation sources.
POWER ON/OFF
Press and hold the [ ] button at the back to power
on/off the unit.
DAB RADIO
TUNING TO DAB RADIO STATIONS
1. With the speaker turned on, it comes to DAB mode.
“ DAB ” is displayed on the panel.
2. The radio performs a full scan automatically and it will
synchronize with the DAB time.
NOTE : To search the DAB signal again, long press
[ MODE ] button. “ Scanning ” is displayed.
3. After the searching is completed, short press [
p
] or
[
q
] button to choose the station.
NOTE : The stations may change from time to time. To
update the station list, select the “ Full Scan ” in menu
option to perform full scan.
STORING DAB RADIO STATIONS