GR-100 User's Manual Revision 1.2
3.0 Setting up the Unit
3.6 Remote
setup
The GR-100 is supplied with an external RS-232 serial cable that plugs into a connector on its base. The
other side of the cable is connected to the serial port on a PC running the Monitor 100U Remote Control
Software supplied by Exploranium on the CD included with the unit. Operating instructions for this
software are described in Section 4 of this manual. The software allows you to set-up remotely all
system parameters and operating functions and retrieve stored data.
3.7 Earphone
The earphone supplied with the unit can be used in noisy environment, or in covert operations. The
earphone can be plugged into a special connector on the base of the unit after lifting the rubber cover.
The earphone jack is located under the
rubber cover on the left-hand side. The
right-hand side is fixed to avoid the loss of
the cover. When connected, it
automatically disables the internal audio
beeper.
NOTE
: The BUZZER must be enabled for
this function to work.
When the earphone is unplugged the unit
automatically reverts to internal audio
functions.
Figure Earphone Connection
If the GR-100 is used with the belt mounted leather carrying pouch, connect the
right-angle earphone plug as shown in the figure above. Hold the cable along the left
side of the case and insert the unit into the leather pouch with the cable running
along the side of the pouch as shown in the next figure. There is space provided
inside the pouch for the connector to fit. GR-100 can be taken out of the pouch
without disconnecting the earphone.
Earphone Used
in Belt Pouch
SAIC/Exploranium – Proprietary
Page 14
Revision Date:
November 2004
Содержание GR-100
Страница 14: ......
