GR-100 User's Manual Revision 1.2
4.0 Monitor 100U PC software
4.0 Monitor 100U PC software
The Monitor 100U is a program for the remote control of the GR-100 Personal Radiation Monitor. This
software permits you to set-up the operating parameters in the GR-100 from a PC, as well as retrieve
internal data for analysis and record keeping.
The Monitor 100U software is supplied on the CD ROM that is included with the GR-100 unit. To launch
the software:
1. Copy the directory “Monitor100U” from the CD to the desired location on your PC.
2. Create a shortcut to the Mon100U.exe file on your desktop for easier software launching.
3. With the serial cable supplied with the unit, connect one side of the cable to the serial port at the
back of your PC. Note the serial port number.
4. Pull the left-hand side of the rubber cover on the bottom of the GR-100 to gain access to the
connectors. The right-hand side of the rubber cover is affixed to the case to prevent accidental
loss of the cover. Connect the mini-USB connector of the serial cable to the mating mini-USB jack
on the unit.
Caution
: Use only communication cable supplied with the unit. Using any other USB cable can
cause fatal damage to the GR-100 or the PC.
5. Turn the GR-100 ON. The message “REMOTE” will appear on the screen to confirm that the unit
is connected to the PC.
6. Start the program by double-clicking the Mon 105 icon (you can also run the Mon105.exe from
the CD directly). The Main Menu screen appears.
SAIC/Exploranium – Proprietary
Page 17
Revision Date:
November 2004
Содержание GR-100
Страница 14: ......
