Explo X2 Wave Flamer, Руководство пользователя

Страница: 14 / 62

14
4.1.1 ID AND BOX NUMBER
Shows you the ID number (line 1) and the Box number (line 2) of the device.
4.1.2 PRESSURE
Shows the current pressure of the device in percent (line 1). Line 2 shows the time (in seconds) that
the device needs to build up maximum pressure, as well as the lowest value the pressure has reached
after getting to 100% (u97% means that the device has lost pressure to 97% after an ignition).
The letter at the end of the second line shows you if the pressure is set to Low (L), Medium (M), or
High (H). This feature is currently not in use. The normally used setting is Medium.
4.1.3 MAINS SUPPLY INFORMATIONS
Shows the power values of the mains supllies for the 12V supply (line 1), as well as the 24V supply
(line 2).
4.1.4 TYPE AND SHOW NAME
Shows you the type of the product as it will be listed in the device list of the transmitter (line 1), as well
as the name of the show currently saved on the device (line 2).
4.1.5 CHECK AND LINES
Shows you the Checksum of the device (line 1) and the number of ignition cues the current show has
for the device (line 2).